Shimano Australia Cycling Pty Ltd — Hollowtech cranksets for certain Shimano Ultegra and Dura-Ace models

PRA number


Published date

Product description

11-speed bonded Hollowtech II road cranksets, suitable for certain Ultegra and Dura-Ace models.

• FC-6800
• FC-R8000

• FC-9000
• FC-R9100
• FC-R9100-P

Manufactured between 1 June 2012 – 30 June 2019. A 2-letter manufacturing code is stamped on the inside of the crank arm.

Please see attached list of affected part numbers and manufacturing codes.

Five affected cranksets and their model numbers
Inside of crank arm showing model and manufacturing codes
Identifying features

Reasons the product is recalled

The bonded crank parts can separate and break, causing the crank arm to separate from the main crank arm-body.

The hazards to consumers

There is a risk of a fall or crash if the crank arm separates. At the time of publishing, Shimano has received 4,519 incidents of cranksets separating, and six reported injuries, including bone fractures, joint displacement and lacerations.

What consumers should do

Consumers should not use a bike with Shimano Ultegra or Dura-Ace cranksets until they check if theirs is an affected model. Instructions on how to check are on the Shimano website.

If you have an affected model, contact the nearest authorised Shimano dealer to arrange for the cranksets to be inspected. Any cranksets that fail the inspection process will be replaced free of charge.

For more information, consumers can contact Shimano on 1800 269 958 from 8:00am to 5:00pm AEST Monday to Friday, or online at‐AU/information/contact‐shimano.html

Traders who sold this product

Please see attached trader list.

List of traders who sold this product

Where the product was sold


Dates available for sale


Recall advertisements and supporting documentation

Responsible regulator

Australian Competition and Consumer Commission is the responsible regulator for this recall.

Product category

Is this page useful?