PRA number
2021/18828
Published date
Product description
A wheel bearing kit supplied as an aftermarket product suitable for installation on BMW 1 to 4 Series vehicles.
The kit comprises a wheel bearing and four screws used to mount the wheel to the vehicle.
Only the following kits are affected:
Kits manufactured from April 2020 to December 2020, with date codes 91S, 92S, 93S, 171S, 172S, 174S, 175S, 199S, 200S, 202S, 212S, 213S, 267S, 280S, 281S, 282S, 297S or 343S
The kit comprises a wheel bearing and four screws used to mount the wheel to the vehicle.
Only the following kits are affected:
Kits manufactured from April 2020 to December 2020, with date codes 91S, 92S, 93S, 171S, 172S, 174S, 175S, 199S, 200S, 202S, 212S, 213S, 267S, 280S, 281S, 282S, 297S or 343S
What are the defects?
The thread pitch of the screws does not fully match the thread pitch of the bearing. Therefore, the wheel bearing may not be properly secured to the vehicle.
What are the hazards?
In the case of a high impact shock on the wheel, for example in an accident, the wheel could partly or fully detach from the body of the vehicle, increasing the risk of injury to the vehicle occupant or bystanders.
What should consumers do?
Consumers should contact the place of purchase for a replacement kit, to be installed free of charge.
For further information, consumers should contact the place of purchase, or SKF via https://www.skf.com/au/support/contact
For further information, consumers should contact the place of purchase, or SKF via https://www.skf.com/au/support/contact
Supplier
Traders who sold this product
SKF Australia Pty Ltd
Sydneywide European Auto Parts (NSW & Victoria)
Hanvic South Yarra Auto Parts
Lintrex Australia
Sydneywide European Auto Parts (NSW & Victoria)
Hanvic South Yarra Auto Parts
Lintrex Australia
Where the product was sold
Nationally
Dates available for sale
-
Recall advertisements and supporting documentation
Responsible regulator
Australian Competition and Consumer Commission is the responsible regulator for this recall.
