SRAM — Avid Single Digit 7 Bicycle Mechanical Rim Brake

PRA number


Published date

Product description

Avid Single Digit 7 (SDG7) bicycle mechanical rim brake.

All Avid SDG7 rim brakes with production codes 01JUN14 to 26MAY17 are involved in this recall; the production date can be found on the back of the brake arm. Brakes produced prior to 1 June 2014 are not involved in this action.

Product codes are 00.5115.007.000 08A RB SDG7 FRONT 90 4MMSPCR 16MM BOLT and 00.5115.007.010 08A RB SDG7 REAR 90 4MMSPCR 16MM BOLT.
Single Digit 7 image
Single Digit 7 Date location
Identifying features

Other identifying numbers

Affected brakes are identifiable by the date code located at the rear of the brake arm. Affected brakes will have a date code between 01JUN14 and 26MAY17.

Reasons the product is recalled

There is a potential for the cable noodle anchor rivet to dislodge from the brake unit. This can cause one of the two brakes to fail.

The hazards to consumers

This would result in the loss of braking power for that individual brake, resulting in extended stopping distance or unexpected braking behaviour. This may pose an accident or injury risk to the rider.

What consumers should do

Consumers should stop using the bicycle and contact SRAM DSD on 03 9212 6100 to arrange a replacement product.


Where the product was sold


Responsible regulator

Australian Competition and Consumer Commission is the responsible regulator for this recall.

Product category

Is this page useful?