Valspar Paint (Australia) Pty Ltd—Wattyl Killrust Cold Galvit 375g aerosol packs

PRA number

2013/13743

Published date

Product description

An aerosol zinc-rich epoxy primer for use on steel, wrought iron and other ferrous metal surfaces
Killrust Cold Galvit_375g
Identifying features
Batch No: C3431112

Other identifying numbers

Batch No: C3431112

What are the defects?

There is a possibility that the packs have become over-pressurised and may rupture during storage and use.

What are the hazards?

An over-pressurised pack can rupture during storage or use, potentially causing property damage or personal injury.

What should consumers do?

Do not shake the pack. Hold the pack away and remove the plastic cap to check the batch number. The batch number C3431112 is printed on top of the pack on the outside rim, beneath the removable plastic cap. If the batch number is confirmed to be the affected batch, isolate the pack in a cool place away from direct sunlight. If the batch number is not readable then follow the same procedure and contact Valspar, giving your contact details, to arrange for collection and to receive a refund.

Supplier

Valspar Paint (Australia) Pty Limited

Traders who sold this product

Leading hardware chain stores, independent hardware stores and paint specialists

Where the product was sold

Nationally

Dates available for sale

-

Recall advertisements and supporting documentation

Recall advertisement

Responsible regulator

Australian Competition and Consumer Commission is the responsible regulator for this recall.

Product category