Nursery Elegance Pty Ltd—Peg Perego Skate Pram/Stroller

PRA number

2009/10670

Published date

Product description

The product was sold through children's nursery product retailers since 1 February 2008. The Skate name can be easily identified on the rear of the canopy.
Peg Perego Skate bassinet-seat assembly
Peg Perego Skate as a Pram
Identifying features
Model PSK300034 in all colours.

Other identifying numbers

Model PSK300034 in all colours.

Reasons the product is recalled

The bassinet and seat assembly has steel pins on each side which have been reported to have fallen out in use. These pins do not have screw driver slot in the end. If the pins on both sides are no longer in place the bassinet/seat assembly is no longer locked in position and can rotate freely and may cause a child to fall out.

The hazards to consumers

Injury.

What consumers should do

Customers are urged to check their Peg Perego Skate bassinet/seat assembly to ensure that the pins are in place. If either one or both are missing then stop using the product. Even if the pins are still in place, a free repair kit will be offered. The kit includes two replacement pins and an instruction sheet. Alternatively a free repair can be arranged. To arrange for a repair kit or repair, contact Nursery Elegance on 1300 330 356 (9am to 5pm EST Summer Time) advising the catalogue number on the underside of the frame.

Supplier

Nursery Elegance Pty Ltd

Where the product was sold

Nationally

Responsible regulator

Australian Competition and Consumer Commission is the responsible regulator for this recall.

Product category

Is this page useful?